Condition: Brand New

Epson C9344, Maintenance Box Chip Resetter

(5/5)

KSh 6,000.00

KSh 6,500.00

Save 8%

(ex-VAT)

Trending Top Rated

Buy on WhatsApp Call Now

Key Features

Target Device: Specifically designed for the Epson C9344 Maintenance Tank (Waste Ink Box).

Contact Interface: Features a 7-pin configuration (typically 3 pins on top and 4 on bottom) to align with the maintenance box chip contacts.

Power Source: Most models are either battery-operated (built-in button cell) or powered via a USB Type-C port for unlimited use.

Reset Requirement: For optimal results, the chip must be reset before the ink level reaches 15%; if the chip reports as completely "full" (0% remaining), it may become permanently locked and unresettable.

Indicator Light:

Red Light: Connection established or resetting in progress.

Green Light: Successful reset.

Material: Usually constructed from high-quality ABS plastic.

Physical Dimensions: Approximately 70 x 40 mm (2.75 x 1.57 inches).

Category: Epson Printers Consumables > Epson Chip Resetters

The C9344 Chip Resetter, which is available in Kenya is a maintenance tool designed for Epson printers to reset the waste ink counter on the C9344 (C12C934461) maintenance box. It is primarily a third-party accessory used to extend the life of the maintenance tank by resetting its electronic chip to 100% capacity. Key Specifications Target Device: Specifically designed for the Epson C9344 Maintenance Tank (Waste Ink Box). Contact Interface: Features a 7-pin configuration (typically 3 pins on top and 4 on bottom) to align with the maintenance box chip contacts. Power Source: Most models are either battery-operated (built-in button cell) or powered via a USB Type-C port for unlimited use. Reset Requirement: For optimal results, the chip must be reset before the ink level reaches 15%; if the chip reports as completely "full" (0% remaining), it may become permanently locked and unresettable. Indicator Light: Red Light: Connection established or resetting in progress. Green Light: Successful reset. Material: Usually constructed from high-quality ABS plastic. Physical Dimensions: Approximately 70 x 40 mm (2.75 x 1.57 inches). Compatible Printer Models The C9344 resetter works with a wide range of Expression Home, WorkForce, and EcoTank series printers, including: Expression Home: XP-2100, XP-2105, XP-3100, XP-3105, XP-4100, XP-4105, XP-4200, XP-4205. WorkForce: WF-2810, WF-2830, WF-2835, WF-2850, WF-2930, WF-2950. EcoTank: ET-2840, ET-4810, L3550, L3560, L5590. Usage Instructions Align the resetter pins with the gold contacts on the maintenance box chip. Press firmly and hold for 3–5 seconds. Wait for the indicator light to flash red and then turn a solid green. Note: After resetting, you must physically clean or replace the waste ink sponges inside the box to prevent ink overflow.