Extreme 60cm Dtf Printer With Double i1600 Printer Heads

Exteme 60cm Dtf Printer With Double i1600 Printer Heads which is currently available in Kenya General specifications Printhead: Dual Epson I1600-A1 heads. The i1600 printhead features 1,600 nozzles (half the number of the i3200) and 4 ink channels. The "A1" designation indicates compatibility with water-based inks. Maximum print width: 60 cm (24 inches), suitable for roll-to-roll printing. Ink type: Textile pigment ink, typically CMYK plus White (CMYKW). RIP software: The required RIP (Raster Image Processor) software can vary by manufacturer, but common options include Maintop, Riin, Cadlink, and Photoprint. Operating system: Most systems are compatible with Windows 7, 10, or 11. Connectivity: Often uses a USB 2.0 or Gigabit LAN interface. Performance and features Printing speed: With dual i1600 heads, typical printing speeds range from 8–12 square meters per hour (sqm/h), depending on the print pass and resolution settings. For comparison, i3200 heads offer faster speeds of up to 13 sqm/h. Printing resolution: High-accuracy settings typically reach 1440 DPI. Color output: The printers offer vibrant and high-precision color output, aided by the multiple ink channels and grayscale printing capabilities of the i1600 heads. White ink circulation: Most models include an automatic white ink stirring and circulation system to prevent ink from settling and clogging the printheads. Heating system: Integrated heating sections (often front, middle, and rear) help ensure the ink dries correctly for proper transfer. Automatic cleaning: The printer is typically equipped with an automatic cleaning function for the printheads. Physical and environmental specifications Dimensions and weight: Measurements vary, but a representative model might have a printer dimension of around 172 x 86 x 158 cm and a weight of about 160 kg. This does not include a powder shaker and curing unit, which are separate components. Working environment: Temperature: Ideally 20–28°C. Humidity: Optimal relative humidity is 65–75%. Power: Typical requirements are 220V/110V and 50/60HZ, though the power consumption of the printer itself is much lower than the accompanying shaker/dryer unit. Associated equipment For a complete DTF workflow, a powder shaker and heat press are necessary components. The shaker machine applies the hot-melt powder adhesive and cures the film.